全电动伺服数控松节油拳打

更新:2021-10-11 17:36:49      点击:
  • 制造:   智行
  • 型号:      
产品介绍

工艺特性  Process Characteristics:
◆采用高扭矩服装电机直接驱动。高精度,稳定可靠,可达冲压频率1500时间 /分.
◆床采用三维软件设计.,通过有限元分析对试验结果进行了验证,合理结构,良好刚性,保证机床精度的长期稳定性。
◆焊接后对床层进行严格的低温退火处理,完全消除焊接应力,避免机床使用过程中焊接应力释放引起的变形。
●整张床,高装配精度,基础要求低,易于安装到位。
◆可以连续运行很长时间。
◆利用伺服电机直接驱动改善主轴的维护,大幅度降低能耗,低噪声高速、小振动的优点。
●冲击压力的自动选择,能耗是液压冲头1/3.
.能实现滚动筋、雕刻术 、静音加工及其他冲孔技术。
◆设备的加工范围可根据客户的需要定制。
●It is directly driven by a large torque servo motor, with higher accuracy, sablity and relability. The stamping frequency can reach 1500times 1 min.
The bed is designed with three dimensional software. Ater finite element analysis and calibration experiments, the structure is reasonable and the rigidity is good, which ensures the long-term stablity of the machine tool.
After the bed is welded, it undergoes stict low-temperature annealing treatment to completely eliminate the weldi ng stess and prevent the machine tool from being defomed due to the release of weld ng stress during use.
The overall bed has high assembly precision, low requirements on foundation and easy nstalation.
Itcan be used for a long time.
●The spindle uses servo motor direct drive to improve maintenance, greatty reduce energy consumption, and has the advantages of low noise, high speed and low vbration.
The pressing pressure is automatically selected and the energy consumption is 1/3 of the hydraulic press.
● It can realize the punching process of olling, engraving and silent processing.
The processing range of the equipment can be customized according to the needs of customers.







更多产品